The E-seal is a radio frequency device that transmits container information when interrogated by an i-TEK RFID portal or mobile reader. It combines mechanical security of standard seals with the electronic security offered by i-TEK RFID technology. The E-seal has a unique ID code and can read-write user memory capabilities. It provides automatic identification of trucks, trailers, and containers.
Many Customs will use it to implement a certification system of an authorized economic operator (AEO) and use E-seal to enhance the efficiency of Customs clearance.
The E-seal is the mechanical bolt seal with RFID technology. It stands by the ISO 17712:2013 standard and other anti-tampering function.
The passive E-seal works without battery and its reading range about 2-3 meter with Handheld Device.
The passive E-seal has the following functions:
Pin | |
---|---|
Length | 75 mm |
Weight | 36 gm |
Material | Carbon steel galvanisation + ABS |
Body | |
---|---|
Length | 68 mm |
Weight | 35 gm |
Material | Carbon steel galvanisation + PC + ABS |
Air interface Protocol | ISO/IEC 18000-6C, EPC Class 1 |
Chip | Alien Higgs 3 |
Unique TID | 96 bit |
EPC | 96 bit |
User Memory | 512 bit |
Data retention | Up to 50 years |
Write endurance | Up to 100,000 cycles |
Read range | Up to 8 meters |
Operating frequency | 860 MHz to 960 MHz |
Operating mode | Passive |
Operating Temperature | -30 °C to +80 °C |
Storage Temperature | -30 °C to +80 °C |
All contents © 2018 Copyright Registration No. SW - 11447 / 2018. All Rights Reserved.